Supermicro SBA-7121M-T1 - DIMM Installation; Figure 3-5. 8-Slot DIMM Numbering; Table 3-1. Populating 8 Memory Slots and 2 Cpus for Interleaved Operation

3-7
Chapter 3: Setup and Installation
Figure 3-5. 8-slot DIMM Numbering
DIMM Installation
Installing Memory Modules
1. Power down the blade module.
2. Remove the blade from the enclosure and the cover from the blade.
3. Remove the air shroud that covers the DIMM slots.
Table 3-1. Populating 8 Memory Slots and 2 CPUs for Interleaved Operation
Number
of
DIMMS
CPU0 CPU1
Channel
0
Channel
1
Channel
0
Channel
1
1A 1B 2A 2B 1A 1B 2A 2B
2 XX
4 X X X X
6 XXXXXX
8 X X X X X X X X
WARNING: Exercise extreme care when installing or removing DIMM modules
to prevent any possible damage.
Center of Board
Edge of Board
DIMMA 2A
DIMMA 2B DIMMA 1A DIMMA 1B
DIMMB 1B
DIMMB 1A DIMMB 2B DIMMB 2A
CPU1CPU2