4-1
Chapter 4
Blade Module Features
Figure 4-1. SBA-7121M-T1 Blade Unit Front View
This chapter describes the SBA-7121M-T1 blade unit. Installation and maintenance
should be performed by experienced technicians only.
See Figure 4-1 for a front view of the blade unit and Table 4-1 for its features.
Table 4-1. SBA-7121M-T1 Blade Unit Features
Feature Description
Processors
Supports two AMD Six/Quad/Dual-Core Opteron 2300/2200 series
processo
Memory
Supports up to 64 GB of ECC Registered DDR2-800/667/533 SDRAM in
eight DIMM slots
Storage One or two 3.5" hot-plug SATA hard disk drives
Ports KVM port (1)
Features
Onboard ATI ES1000 graphics chip with 16MB of SDRAM, IPMI 2.0, ATA/
100, Plug and Play, APM 1.2, DMI 2.3, PCI 2.2, ACPI 1.0/2.0, SMBIOS
2.3, Real Time Clock, Watch Dog,
Power Consumption
Base Power Draw (~35W) / Power per CPU (50W/80W/120W) / Power per
DIMM (typically ~7W)
To Next Page
Loading...
