SBA-7121M-T1 Blade Module User’s Manual
4-6
Clearing CMOS
1. First power down the blade and remove it from the enclosure.
2. Remove the blade cover to access the mainboard (see Section : Removing/
Replacing the Blade Cover on page 3-2 for further details). Short the CMOS pads
with a metal object such as a small screwdriver.
3. Replace the cover, install the blade back into the enclosure and power it on.
4-3 Blade Unit Components
Figure 4-5. Exploded View of SBA-7121M-T1 Blade Module
1
2
2
4
5
3
4
To Next Page
Loading...
