SBA-7121M-T1 Blade Module User’s Manual
6-12
6-5 Security Menu
The menu options for the SECURITY menu are shown in Table 6-14.
The AMI BIOS provides a Supervisor and a User password. If you use both passwords,
the Supervisor password must be set first.
2nd Drive
Specifies the boot sequence for the 1st Removable Drive. The options are USB:
PeppCMM Virtual Disc 1, USB: P
EPPCMM VIRTUAL DISC 2 and DISABLED.
X CD/DVD Drives
This feature allows the user to specify the boot sequence from available CD or
DVD disc drives.
1st Drive
Specifies the boot sequence for the 1st CD/DVD Drive. The options are USB:
PeppCMM Virtual Disc 1, USB: P
EPPCMM VIRTUAL DISC 2 and DISABLED.
2nd Drive
Specifies the boot sequence for the 1st CD/DVD Drive. The options are USB:
PeppCMM Virtual Disc 1, USB: P
EPPCMM VIRTUAL DISC 2 and DISABLED.
Table 6-14. Security Menu
Menu Option Description
Change Supervisor
Password
Select this option and press <ENTER> to access the sub menu, and then type in
the password.
Change User
Password
Select this option and press <ENTER> to access the sub menu, and then type in
the password.
Boot Sector Virus
Protection
This option is near the bottom of the S
ECURITY SETUP screen. The options are
E
NABLED and Disabled.
• Select D
ISABLED to deactivate the Boot Sector Virus Protection.
• Select E
NABLED to enable boot sector protection.
When E
NABLED, the AMI BIOS displays a warning when any program (or virus)
issues a Disk Format command or attempts to write to the boot sector of the hard
disk drive.
Table 6-13. Boot Menu
Menu Option Description
To Next Page
Loading...
