SBA-7121M-T1 Blade Module User’s Manual
6-4
CPU Configuration
The menu options in the CPU CONFIGURATION submenu and their descriptions are
shown in Table 6-2.
SATA Configuration
The menu options in the FLOPPY/IDE/SATA ConfiguraTION submenu and their
descriptions are shown in Table 6-3
Watch Dog Timer
This setting is used to ENABLE or Disable the WATCH DOG TIMER function. It must
be used in conjunction with the W
ATCH DOG jumper.
I2C Switch Auto or D
ISABLE the I2C switch.
X MPS Configuration
MPS Revision
This setting allows the user to select the MPS revision level. The options are 1.1
and 1.4.
X Smbios Configuration
Smbios Smi
Support
This setting allows SMI wrapper support for PnP function 50h-54h. The options
are Enabled and D
ISABLED.
Table 6-2. CPU Configuration Submenu
Menu Option Description
GART Error
Reporting
This setting is used to Enable or Disable GART error processing.
Microcode Update This setting is used to Enable or DISABLE microcode updates for Virtual Machine.
Secure Virtual
Machine Mode
This setting is used to Enable or D
ISABLE processor-assisted virtualization.
Power Now This setting is used to ENABLE or Disable the AMD Power Now feature.
Power Now
This setting is used to E
NABLE or Disable the generation of ACPI _PCC, _PSS,
and _PCT objects.
ACPI SRAT Table Enable or Disable the building of an ACPI SRAT Table.
Thermal Throttling This setting is used to E
NABLE or Disable Thermal Throttling.
Table 6-3. SATA Configuration Submenu
Menu Option Description
On-board IDE
Controller
Enables or D
ISABLES on-board IDE controller.
Serial ATA 0 Enables or DISABLES Serial ATA 0.
nVidia RAID Function Enables or D
ISABLES the nVidia RAID funtion in the system.
Table 6-1. BOOT Features (Continued)
Menu Option Description
To Next Page
Loading...
