6-5
Chapter 6: BIOS
X Primary IDE
Master
This displays the status of Auto detection of IDE devices.
Type Select the type. Options include: Auto, CD/DVD and ARMD
LBA/Large Mode Sets LBA Large Mode. Options are DISABLED and Auto.
Block
(Multi-Sector
Transfer)
This sets the data transfer rate from or to the device. Options are Auto (for
multiple sectors) and D
IABLE (for one sector at a time).
PIO Mode This sets the PIO mode. Options are Auto, 0, 1, 2, 3 or 4.
DMA Mode This set the DMA mode. Options are Auto, 0, 1, 2, 3 or 4.
S.M.A.R.T. Sets the S.M.A.R.T. mode. Options are Auto, DISABLE and ENABLE.
32-bit Data
Transfer
Enables or D
ISABLES 32-bit data transfer.
X Serial ATA 0
Primary Channel
While entering BIOS, it auto detects the presence of IDE devices. This displays
the status of auto detection of IDE devices.
LBA/Large Mode Sets LBA Large Mode. Options are D
ISABLED and Auto.
Block
(Multi-Sector
Transfer)
This sets the data transfer rate from or to the device. Options are Auto (for
multiple sectors) and D
IABLE (for one sector at a time).
PIO Mode This sets the PIO mode. Options are Auto, 0, 1, 2, 3 or 4.
DMA Mode This set the DMA mode. Options are Auto, 0, 1, 2, 3 or 4.
S.M.A.R.T. Sets the S.M.A.R.T. mode. Options are Auto, D
ISABLE and ENABLE.
32-bit Data
Transfer
Enables or DISABLES 32-bit data transfer.
X Serial ATA 0
Secondary Channel
While entering BIOS, it auto detects the presence of IDE devices. This displays
the status of auto detection of IDE devices.
LBA/Large Mode Sets LBA Large Mode. Options are DISABLED and Auto.
Block
(Multi-Sector
Transfer)
This sets the data transfer rate from or to the device. Options are Auto (for
multiple sectors) and D
IABLE (for one sector at a time).
PIO Mode This sets the PIO mode. Options are Auto, 0, 1, 2, 3 or 4.
DMA Mode This set the DMA mode. Options are Auto, 0, 1, 2, 3 or 4.
S.M.A.R.T. Sets the S.M.A.R.T. mode. Options are Auto, DISABLE and ENABLE.
32-bit Data
Transfer
Enables or D
ISABLES 32-bit data transfer.
Hard Disk Write
Protect
Disable/Enable device write protection. This will be effective only if device is
accessed through BIOS.
Table 6-3. SATA Configuration Submenu (Continued)
Menu Option Description
To Next Page
Loading...
