SBA-7121M-T1 Blade Module User’s Manual
5-2
3. For the DISKS selection, use the arrow keys to add drives to the ARRAY section. You
must select and add at least two drives to the A
RRAY section for RAID to work on the
module.
4. Press <F7> to finish.
5. In the confirm message screen that appears press <Y> to confirm your selections.
6. Another confirm screen will appear asking you if you want to “Clear MBR”. Press
<Y> again to confirm this message.
7. Press <C
TRL> + <X> to exit the program.
To Next Page
Loading...
