Need help?Do you have a question about the Supermicro SSE-G3648B and is the answer not in the manual?
General| Switch Type | Managed |
|---|---|
| Manageable | Yes |
| Number of Ports | 48 |
| Switching Capacity | 176 Gbps |
| Jumbo Frame Support | Yes |
| Input Voltage | 100-240V AC |
| Form Factor | 1U Rackmount |
| Product Type | Switch |
| Uplink Ports | 4 x 10G SFP+ |
| Uplink Port | 10G SFP+ |
| Forwarding Rate | 131 Mpps |
| MAC Address Table Size | 16K |
| MAC Address Table | 16K |
| Power Supply | Internal |
| Weight | 11 kg |
General description of Supermicro SSE-G3648B/BR Ethernet aggregation switches for data centers and enterprise networks.
Details the front panel, console port, and back panel of the SSE-G3648B/BR switches.
Explains indicator lights for power supply, system diagnostics, and work mode on SSE-G3648B/BR switches.
Lists supported SFP transceivers and details RJ45 and SFP+ ports on SSE-G3648B/BR switches.
Describes the Power Supply Module (PSM) for SSE-G3648B/BR switches, including specifications and hot-plug capability.
Details fan modules in SSE-G3648B/BR switches, noting self-adjusting speed and hot-plug support.
Lists key specifications for SSE-G3648B/BR switches, including dimensions, weight, ports, power input, and operating conditions.
Introduces industry warnings for potential bodily injury and advises contacting support for assistance.
Advises reading installation instructions before connecting the system to the power source.
States product relies on building's protection and specifies protective device rating (250V, 20A).
Warns to disconnect all power sources and cords before accessing chassis interior for installation or removal.
States only trained and qualified personnel should install, replace, or service the equipment.
Indicates unit is for restricted access areas, requiring special tools for entry, and warning doesn't apply to workstations.
Warns of explosion danger if batteries are replaced incorrectly and advises using manufacturer-recommended types.
Mandates that equipment installation must adhere to local and national electrical codes.
States that product disposal must be handled according to all national laws and regulations.
Advises using provided/designated cables/adapters to prevent malfunctions/fire, and prohibits unauthorized UL/CSA certified cables.
Lists requirements for clean area, temperature, humidity, grounding, and ventilation for SSE-G3648B/BR switch installation.
Provides guidance on reading instructions, preparing tools, site preparation, and regular maintenance for the SSE-G3648B/BR switch.
Lists critical security warnings, including laser safety, electrical precautions, and proper handling of equipment.
Outlines steps for preparing SSE-G3648B/BR switch installation, including verifying contents and gathering tools.
Provides step-by-step instructions for mounting SSE-G3648B/BR switch into a 19" rack, emphasizing ventilation and proper fastening.
Details procedure for installing and removing the main power supply module for SSE-G3648B/BR switches.
Explains how to install a second (redundant back-up) power supply module into the SSE-G3648B/BR switch.
Describes procedure for installing/removing fan modules in SSE-G3648B/BR switch, with warning about moving parts.
Guides on connecting console cable to SSE-G3648B/BR switch for configuration via a character terminal (PC).
Details procedure for installing SFP+ transceivers into SSE-G3648B/BR switch, including safety precautions.
Explains how to connect copper Ethernet and fiber optic cables to SSE-G3648B/BR switch, including status checks.
Provides instructions for connecting AC power supply cable to SSE-G3648B/BR switch, including power status checks and self-test.
Lists checks to perform after installation, including power, ground, console, and external cable connections.
To Next Page
