Need help?Do you have a question about the Supermicro SSE-G3748 Series and is the answer not in the manual?
General| Product Series | SSE-G3748 Series |
|---|---|
| Switch Type | Managed |
| Switching Capacity | 176 Gbps |
| MAC Address Table | 16K entries |
| Jumbo Frame Support | Up to 9KB |
| Humidity | 10% to 90% non-condensing |
| Management | Web GUI, CLI, SNMP |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Category | Gigabit Ethernet Switch |
| Power Supply | Dual redundant power supplies (AC) |
Covers circuit breaker, power disconnection, and electrical code compliance.
Includes warnings on equipment installation, battery handling, and power supplies.
Covers physical installation and CLI access for SONIC models.
Covers physical installation and configuration for SMIS models.
Covers firmware residing on the switch and upgrading procedures.
Provides instructions for installing rack brackets and inner/outer rails.
Details the procedure for mounting the switch into the assembled rack rails.
To Next Page
