Supermicro SSE-G3748 Series - Chapter 1 Introduction; Introduction; Overview; Features

6
Chapter 1: Introduction
Chapter 1
Introduction
1.1 Introduction
This document is designed to provide Supermicro switch users with the information required
to congure the basic functionalities on the switch through CLI commands.
Note: Most of the content in this manual applies to the SSE-G3748 series of switches.
1.2 Overview
The SSE-G3748 series switch is an Out-of-Band (OOB) switch with forty-eight 1G RJ45 ports,
six SFP28 25G ports, one 1G RJ45 100/1000Base-T management port, one RJ45 serial
console port, and one USB Type A storage port in a xed conguration. The SSE-G3748 series
enables the aggregation of high density 1RU rack servers, providing cost-e󰀨ective network
infrastructure solutions in data center and enterprise network. The SSE-G3748 series switch
is an extremely compact 1RU form factor that increases the network radix for high density
switching.
SSE-G3748/D/R/DR-SONIC SSE-G3748/D/R/DR-SMIS
Operating System
Software for Open Networking in the Cloud
(SONiC OS)
SMIS
(Supermicro OS )
Supermicro provides user-friendly enhancements to the OS that suits to the various data
center and Enterprise applications.
1.3 Features
The SSE-G3748 series Ethernet switches o󰀨er the following features:
• Forty-eight 1G RJ45 ports
• Six 25G SFP28 ports
• One RJ45 serial console
• One RJ45 100/1000BASE-T management port
• One USB Type A storage port