E1031Series switch Installation Guide Chapter 3 Device Installation
32
4. Device Installation
Installation Preparation
In order to prepare for installation of the SSE-G3648B/BR switch, you must verify the package
contents and use the required tools and utilities.
Verify the Package Contents
Please unpack the shipping package and verify carefully the contents inside.
Required Tools and Utilities
The required tools and utilities are shown below:
• Cross (Phillips head) screwdrivers
• Flat-blade screwdriver
• ESD wrist strap
• Antistatic uniform
Caution! Users should prepare the required tools and utilities by themselves.
To Next Page
Loading...
