Supermicro SSE-G3648B - Status LEDs

SSE-G3648B/BR Switch Installation Guide
Page 7
Fig 1-4: Back panel of SSE-G3648B/BR
(with Second Power Supply Installed)
Status LEDs
The indicator light on front panel of the SSE-G3648B/BR has forty-eight RJ45 port indicator
lights, four SFP+ port indicator lights, two power supply indicator lights and a system automatic
diagnostics LED. They are shown below and described in the following table.
Table 1-2: Explanation of Indicator Light of SSE-G3648B/BR Switch
Indicator Light Panel
Sign
State Meanings
Power Supply
Indicator Light
P-1 / P-2
Green light always on
Power supply module move normally
Amber light always on
Power fault
No light
No power supply
System Automatic
Diagnostic LED
STAT
Green light always on
System running normally
Green light blinks
System booting
Work Mode
Indicator Light
MAST
Green light always on
Master mode
Amber light always on
Slave mode