Need help?Do you have a question about the Supermicro SSE-G48-TG4 and is the answer not in the manual?
General| Product Name | SSE-G48-TG4 |
|---|---|
| Manufacturer | Supermicro |
| Device Type | Switch |
| Management Type | Managed |
| Port Speed | 10/100/1000 Mbps |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 131 Mpps |
| MAC Address Table Size | 32K |
| Jumbo Frame Support | Yes |
| Jumbo Frame Size | 9KB |
| VLAN Support | Yes |
| Input Voltage | 100-240V AC |
| Operating Humidity | 10% to 90% non-condensing |
| Layer | Layer 3 |
| Form Factor | Rack-mountable |
| SFP Uplink Ports | 4 x 10 Gigabit Ethernet SFP+ |
| Uplink Port | 4 x 10 Gigabit Ethernet SFP+ |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Standards Compliance | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3ae |
| Ports | 48 x 10/100/1000 Mbps RJ45 |
| Power Supply | 100-240VAC, 50-60Hz, Internal, Redundant |
| Dimensions (W x D x H) | 440 x 257 x 44 mm (17.32 x 10.12 x 1.73 inches) |
To Next Page
