Supermicro SSE-G48-TG4 - 3 VLAN Configurations

Release: 1.0a 20 / 24
Supermicro Switch Web GUI Quick Configuration Guide
3 VLAN Configurations
The SSE-G24-TG4, SSE-G48-TG4, SBM-GEM-X2C, SBM-GEM-X2C+ and SBM-GEM-X3S+
switches support 1024 static VLANs. The SSE-X24S and SBM-XEM-X10SM switches support 4K
static VLANs.
VLANs can be configured in Layer2 Mgmt  VLAN  Static VLANs page.
Fig 12: VLAN Page
In the Member Ports, Untagged Ports, and Forbidden Ports fields, list the ports as comma
separated without space characters. While configuring continuous ports use “-“ for port ranges.
For example to configure ports gi 0/1 to gi0/10 and gi0/15 and gi0/20 as member ports, enter the
Member Ports field as “gi0/1-10,gi0/15,gi0/20”.
The following parameters can be configured in this page.
 VLAN ID - This is a VLAN identifier number. It is mandatory to set this parameter in order
to create a VLAN.
 VLAN Name – Optional name or description to associate with this VLAN.
 Member Ports – Provide all the member ports of this VLAN including tagged and
untagged member ports.