Supermicro Supero X9DRi-LN4F+ - Page 92

4-18
X9DR3-LN4F+/X9DRi-LN4F+ Motherboard User’s Manual
SuperIOConguration
Super IO Chip: This item displays the Super IO chip used in the motherboard.
SerialPort1Conguration
Serial Port
Select Enabled to enable a serial port specied by the user. The options are En-
abled and Disabled.
Device Settings
This item displays the IP address and IRQ (Interrupt Request) address of Serial
Port 1.
Change Settings
Use this feature to set the optimal Environment_Control_Interface (PECI) setting for
a serial port specied. The default setting is Auto, which will allow the AMI BIOS
to automatically select the best setting for the PECI platform.
Device Mode
Use this feature to select the desired mode for a serial port specied. The options
are Normal and High Speed.
SerialPort2Conguration
SOL (Serial_Over_LAN) Serial Port
Select Enabled to enable a serial port specied by the user to be used as the Se-
rial _Over_ LAN port. The options are Enabled and Disabled.
Device Settings
This item displays the IP address and IRQ (Interrupt Request) address of Serial
Port 2.
SOL Change Settings
Use this feature to set the optimal Environment_Control_Interface (PECI) setting for
a serial port specied. The default setting is Auto, which will allow the AMI BIOS
to automatically select the best setting for the PECI platform.
SOL Device Mode
Use this feature to select the desired mode for a serial port specied. The options
are Normal and High Speed.