EasyManuals Logo

Supermicro Supero X9SCi-LN4 User Manual

Supermicro Supero X9SCi-LN4
107 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
Chapter 4: AMI BIOS
4-17
BMCNetworkConguration
Set this feature to congure the IPMI LAN adapter with a network address.
CongurationSource
This feature selects whether the IP address, Subnet Mask and Gateway Address
are automatically assigned by the network's DHCP server (Dynamic Host and Con-
guration Protocol) "Dynamic" or manually entered by the user "Static". If Static is
selected, the IP Address, Subnet Mask and Gateway Address must be manually
entered below. The options are Static, Dynamic and Do Nothing. The following
items are displayed when Static is selected:
Station IP Address - Enter the IP address for this machine. This should be in
decimal and in dotted quad form (i.e., 192.168.10.253). The value of each three-
digit number separated by dots should not exceed 255.
Subnet Mask - Subnet masks tell the network which subnet this machine be-
longs to. The value of each three-digit number separated by dots should not
exceed 255.
Station MAC Address - MAC addresses are 6 two-digit hexadecimal numbers
(Base 16, 0 ~ 9, A, B, C, D, E, F) separated by dots (i.e., 00.30.48.D0.D4.60).
Router IP Address - Enter the Gateway or Router address this machine will
use (i.e., 192.168.10.1).
Router MAC Address - Enter the MAC address of the Router or Gateway (only
if needed).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supermicro Supero X9SCi-LN4 and is the answer not in the manual?

Supermicro Supero X9SCi-LN4 Specifications

General IconGeneral
BrandSupermicro
ModelSupero X9SCi-LN4
CategoryMotherboard
LanguageEnglish

Related product manuals