1-2
SUPERSERVER 5018R-M/5018R-MR User's Manual
1-2 Motherboard Features
At the heart of the SuperServer 5018R-M/5018R-MR lies the X10SRi-F, a single
processor motherboard based on the Intel® C612 Express chipset. Below are the
main features of the X10SRi-F (see Figure 1-1 for a block diagram of the chipset).
Processors
The X10SRi-F supports a single Intel® Xeon® processor E5-2600 v3/v4 or E5-1600
v3/v4 family in an LGA2011 socket. Please refer to the motherboard description
pages on our website for a complete listing of supported processors.
Memory
The X10SRi-F has eight DIMM sockets that can support up to 1 TB of ECC 3DS
LRDIMM (Load-Reduced DIMM), 512 GB of ECC LRDIMM or 256 GB of ECC
RDIMM (Registered DIMMs) DDR4-2400/2133/1866/1600 memory. Please refer to
Chapter 5 for installing memory.
Serial ATA
A SATA controller is integrated into the C612 chipset to support ten SATA 3.0 (6
Gb/s) ports. RAID 0, 1, 5 and 10 levels supported.
I/O Ports
The rear I/O ports include one COM port, a VGA (monitor) port, two USB 3.0 ports,
two USB 2.0 ports, and two gigabit Ethernet ports. A dedicated IPMI LAN port is
also included.
Graphics Controller
The X10SRi-F features an integrated AST 2400 graphics controller.
To Next Page
Loading...
