Supermicro SUPERSERVER 5018R-M - Server Chassis Features; System Power; SATA Subsystem; Control Panel

1-3
Chapter 1: Introduction
1-3 Server Chassis Features
The SC813MTQ-350CB/SC813MTQ-R400CB is a 1U rackmount server chassis.
The following is a general outline of the main features of the chassis.
System Power
When congured as a SuperServer 5018R-M, the SC813MTQ chassis includes
a single 350W power supply. When congured as a SuperServer 5018R-MR, the
SC813MTQ includes two (redundant) 400W power supplies.
SATA Subsystem
For the 5018R-M/5018R-MR, the SC813MTQ chassis was designed to support
four SATA hard drives, which are hot-swappable units.
Control Panel
The SC813MTQ's control panel provides important system monitoring and control
information. LEDs indicate power on, network activity, hard disk drive activity and
system overheat conditions. The control panel also includes a main power button
and a system reset button. The front of the SC813MTQ also includes a COM port
and two USB serial ports for easy access.
Cooling Fans
The SC813MTQ chassis has an innovative cooling design that features four 4-cm
high-performance cooling fans. Each of these fans plug into a fan header on the
motherboard.
Fan speed is controlled by IPMI and determined by system temperature.