Supermicro SUPERSERVER 5018R-M - Power Button

Chapter 5: Advanced Motherboard Setup
5-15
Power Button
The Power Button connection is located
on pins 1 and 2 of JF1. Momentarily
contacting both pins will power on/off the
system. This button can also be cong-
ured to function as a suspend button (see
BIOS Setup). To turn off the power in the
suspend mode, press the button for at
least 4 seconds. Refer to the table on the
right for pin denitions.
Power Button
Pin Denitions (JF1)
Pin# Denition
1 Signal
2 Ground
Universal Serial Bus (USB)
Two USB 2.0 ports (USB0/1) and two USB 3.0 ports (USB2/3) are located on the
I/O back panel of the X10SRi-F. In addition, three USB 2.0 headers (USB4/5, 6/7,
8/9), and two USB 3.0 connectors (USB 10, USB 11) are also provided on the
motherboard (cables not included). USB 11 is a Type A connector. See the tables
below for pin denitions.
USB4/5/6/7/8/9 (3.0) Port
Pin Denitions
Pin# Denition Pin# Denition
1 +5V 5 +5V
2 USB_PN4 6 USB_PN5
3 USB_PP4 7 USB_PP5
4 Ground 8 Ground
USB0/1 (2.0) Port
Pin Denitions
Pin # Denition Pin # Denition
1 +5V 2 +5V
3 USB_PN8 4 USB_PN9
5 USB_PP8 6 USB_PP9
7 Ground 8 Ground
9 Key 10 Ground
USB11 (3.0) Connector
Pin Denitions
Pin# Pin# Signal Name Description
1 19 VBUS Power
2 18 StdA_SSRX- USB 3.0 Differential Receive Pair
3 17 StdA_SSRX+ USB 3.0 Differential Receive Pair
4 16 Ground Ground of PWR Return
5 15 StdA_SSTX- USB 3.0 Differential Transmit Pair
6 14 StdA_SSTX+ USB 3.0 Differential Transmit Pair
7 13 Ground Ground for Signal Return
8 12 D- USB 2.0 Transmit/Receive Dif-
ferential Pair
9 11 D+ USB 2.0 Transmit/Receive Dif-
ferential Pair
10 x