Supermicro SUPERSERVER 5018R-M - Page 58

5-12
SUPERSERVER 5018R-M/5018R-MR User's Manual
Connector Description
COM1/COM2 COM1 (Port)/COM2 (Header)
Fan1 - Fan5, FanA System/CPU Fan Headers
JD1 Speaker/Buzzer
JF1 Front Control Panel Header
JIPMB1 4-pin Exrternal BMC I
2
C Header (for an IPMI Card)
JL1 Chassis Intrusion Header
JPI
2
C1 Power SMB (System Management Bus)
J24 24-pin ATX Main Power Connector
JOH1 Overheat/Fan Fail LED Indicator
JPWR1 +12V 8-pin CPU power Connector
JSD1/JSD2 SATA DOM (Device On Module) Power Connectors
JSTBY1 Standby Power Header
JTPM1 Trusted Platform Module/Port 80 Connector
JUIDB1 UID (Unit Identier) Switch
LAN1/LAN2 Gigabit (RJ45) Ports (LAN1/2)
IPMI_LAN Dedicated IPMI LAN Port
I-SATA0~9, S-
SATA0~3
(Intel PCH) Serial ATA (SATA 3.0) Ports 0/1 (6Gb/sec)
Slots 1/2 PCI-Express 2.0 Slots: Slot1 x2 (in x8), Slot2 x4 (in x8)
Slots 3/4/5/6 PCI-Express 3.0 Slots: Slot3 x8, Slot4 x8, Slot5 x4 (in x8),
Slot6 x16
SP1 Internal Speaker/Buzzer
T-SGPIO 1/2/3 Serial Link General Purpose I/O Headers SATA Connections
USB 0/1 USB 2.0 Ports
USB 2/3 USB 3.0 Ports
USB 4/5, 6/7, 8/9 Front Accessible USB 2.0 Headers 4/5, 6/7, 8/9
USB 10, USB 11 USB10: Front Accessible USB 3.0 Header, USB11: Type A
Header
LED Description Color/State Status
LE1 UID LED Blue: On Unit Identied
LE2 Onbaord Power LED Green: On System Power On
LEDM1 BMC Heartbeat LED Green: Blinking BMC Normal
Notes
• Jumpers not indicated are for test purposes only.
• " " indicates the location of pin 1.