Supermicro SUPERSERVER 5018R-M - Page 67

Chapter 5: Advanced Motherboard Setup
5-21
Manufacturer Mode Select
Close this jumper (JPME2) to bypass SPI
ash security and force the system to use
the Manufacturer mode, which will allow
the user to ash the system rmware from
a host server to modify system settings.
See the table on the right for jumper
settings.
ME Mode Select
Jumper Settings
Jumper Setting Denition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacture Mode
VRM SMB Clock/Data
The VRM SMB Clock/Data is used to
select where the voltage Regulator Mod-
ule's System Management Bus clock sig-
nal (VRM1) or Data (JVRM2) is directed
to. Select between BMC or PCH.
VRM SMB Clock/Data
Jumper Settings
Pin# Denition
Pins 1-2 BMC (default)
Pins 2-3 PCH