WIT.RU
WIT Company – поставка серверов, СХД,
сетевого оборудования, лицензионного ПО
SuperServer 6029P-WTR User's Manual
23
Note: Figure is for illustrative purposes only. Always install servers to the bottom of a rack rst.
Installing the Server into a Rack
1. Extend the outer rails as illustrated above.
2. Align the inner rails of the chassis with the outer rails on the rack.
3. Slide the inner rails into the outer rails, keeping the pressure even on both sides. When
the chassis has been pushed completely into the rack, it should click into the locked
position.
4. Optional screws may be used to secure the to hold the front of the chassis to the rack.
5. Note that the gure above is for illustration purposes only. Always install servers to the
bottom of the rack rst.
screw the handles the
outer rails for secure
purpose if necessary
F.
ABLECOM
DATE:2008/08/14
REV:2
SCREW
SCREW
COMPLETE
1
2
Figure 2-4. Installing the Server into a Rack
To Next Page
Loading...
