Supermicro SuperServer 6029P-WTR - Removing the Dust Cover from the CPU Socket

WIT.RU
WIT Company – поставка серверов, СХД,
сетевого оборудования, лицензионного ПО
SuperServer 6029P-WTR User's Manual
28
Removing the Dust Cover from the CPU Socket
Remove the dust cover from the CPU socket, exposing the socket pins as shown below.
Caution: Do not touch the socket pins.
Socket Pins
Remove the dust cover from
the CPU socket. Do not
touch the socket pins!
Dust Cover
CPU Socket
Removing the Socket Dust Cover
Assembling the Processor Heatsink Module for SNK-P0068PSC
(for CPU1)
Heatsink
(Upside Down)
C
D
d
c
a
b
A
B
On Locations of (C, D), the notches
snap onto the heat sink’s
mounting holes
On Locations (A, B), the notches
snap onto the heatsink’s sides
A
B
D
C
Make sure Mounting
Notches snap into place
Triangle on the CPU
Triangle on the
Processor Clip
Non-Fabric CPU and Processor Clip
(Upside Down)