Supermicro SuperServer E50-9AP-N5 - Page 66

66
SuperServer E50-9AP-N5 User's Manual
Default Options
Restore Defaults
To set this feature, select Restore Defaults from the Exit menu and press <Enter>. These are
factory settings designed for maximum system performance but not for maximum stability.
Save as User Defaults
To set this feature, select Save as User Defaults from the Exit menu and press <Enter>. This
enables the user to save any changes to the BIOS setup for future use.
Restore User Defaults
To set this feature, select Restore User Defaults from the Exit menu and press <Enter>. Use

Boot Override
This feature allows the user to override the Boot Option Priorities sequence in the Boot

one-time override.
UEFI: Built-in EFI Shell
UEFI: IP4 Intel® I210 Gigabit Network Connection
UEFI: IP4 Intel® I210 Gigabit Network Connection