SuperServer E50-9AP-N5 User's Manual
92
Note:
to the root folder and connect this folder to the system. (You can do so by inserting a USB
device that contains the new "Super.ROM" image to your machine for BIOS recovery.)
installed on a bootable or non-bootable USB-attached device. However, the BIOS might need
To perform UEFI BIOS recovery using a USB-attached device, follow the instructions below.
1.
directory of a USB device or a writable CD/DVD.
Note: www.
supermicro.com
ROM" for BIOS recovery use.
2. Insert the USB device that contains the new BIOS image ("Super.ROM") into your USB
drive and power on the system
3. While powering on the system, keep pressing <Ctrl> and <Home> simultaneously on
your keyboard until the following screen (or a screen similar to the one below) displays.
Warning: Please stop pressing the <Ctrl> and <Home> keys immediately when you see the
screen (or a similar screen) below; otherwise, it will trigger a system reboot.