Supermicro SuperServer E50-9AP-N5 - Page 94

SuperServer E50-9AP-N5 User's Manual
94
6. After the BIOS recovery process is completed, press any key to reboot the system.
7. 󰀨
Note: Do not interrupt the BIOS ashing process until it has completed.
8. Press <Del> continuously during system boot to enter the BIOS setup utility. From the
top of the tool bar, click on Boot and press <Enter> to enter the submenu. From the
submenu list, select Boot Option #1 as shown below. Then, boot Option #1 to [UEFI

utility.