Supermicro X11SCA - Page 19

19
Chapter 1: Introduction
Motherboard Features
Peripheral Devices
• One (1) USB 3.1 Gen 2 10G Type-C port on I/O back panel (with MUX)
• One (1) USB 3.1 Gen 2 10G Type-A port on I/O back panel
• One (1) front accessible USB 3.1 Gen 2 Type-C header (with MUX)
• One (1) front accessible USB 3.1 Gen 2 Type-A header
• Two (2) USB 3.1 Gen 1 ports on I/O back panel
• Two (2) front accessible USB 3.1 Gen 1 via shared header
• Two (2) front accessible USB 2.0 via shared header
BIOS
• 256Mb AMI BIOS® SPI Flash BIOS
• DMI 3.0, ACPI 3.0+, USB Keyboard, Real Time Clock wake-up, PCI F/W 3.0, SPI dual/quad speed
support, and SMBIOS 2.7+
Power Management
• ACPI power management
• CPU fan auto-off in sleep mode
• Power button override mechanism
• Power-on mode for AC power recovery
System Health Monitoring
• Onboard voltage monitors for CPU cores, +1.8V, +3.3V, +5V, +/-12V, +3.3V Stdby, +5 Stdby, VBAT,
HT, Memory, PCH Temperature, System Temperature, and Memory Temperature
• CPU 5+2-phase switching voltage regulator
• CPU/System overheat control
• CPU Thermal Trip support
Fan Control
• Five (5) 4-pin fan headers
• Fan status monitoring with rmware
• Low noise fan speed control
System Management
• PECI (Platform Environment Conguration Interface) 3.1 support
• IPMI 2.0 (X11SCA-F only)
• SuperDoctor® 5, Watch Dog, NMI
• Chassis Intrusion header and detection
• Power supply monitoring