31
Chapter 2: Installation
Installing a CPU Heatsink
1. Apply the proper amount of thermal grease to the heatsink.
2. Place the heatsink on top of the CPU so that the mounting holes are aligned with those
on the retention mechanism.
3. Tighten the screws in the following order:
Screw #2
Screw #3
Screw #4
4. Once the screws are tightened, plug the power cord into the FAN1 connector.
Note: Screw #1 is not shown in the illustration.
Note: Graphic drawings included in this manual are for reference only. They might look
different from the components installed in your system.
To Next Page
Loading...
