Supermicro X11SCA - Ipmi

Chapter 4: BIOS
97
4.5 IPMI
Use this feature to congure Intelligent Platform Management Interface (IPMI) settings.
BMC Firmware Revision
This feature indicates the IPMI rmware revision used in your system.
IPMI Status (Baseboard Management Controller)
This feature indicates the status of the IPMI rmware installed in your system.
System Event Log
SEL Components
Select Enabled for all system event logging at bootup. The options are Disabled or Enabled.
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot. Select
Yes, On every reset to erase all system event logs upon each system reboot. Select No to
keep all system event logs after each system reboot. The options are No, "Yes, On next
reset", and "Yes, On every reset".