Chapter 4: BIOS
71
4.3 Advanced
Warning: Take caution when changing the Advanced settings. An incorrect value, a
very high frequency, or an incorrect timing setting may make the system unstable. If
this occurs, revert to the default to the manufacture default settings.
Boot Feature
Fast Boot
This feature enables the system to boot with a minimal set of required devices to launch. This
has no effect on BBS boot options. The options are Disabled or Enabled.
Quiet Boot
Use this feature to select the screen display between the POST messages and the OEM logo
upon bootup. Uncheck the box to display the POST messages. Check the box to display the
OEM logo instead of the normal POST messages. The default is Checked.
Bootup NumLock State
Use this feature to set the Power-on state for the <Numlock> key. The options are On or Off.
Option ROM Messages
This feature controls the display mode for Option ROM. The options are Force BIOS or Keep
Current.
To Next Page
Loading...
