Supermicro X11SCA - Page 42

42
X11SCA/-W/-F User Manual
Power Button
1
NIC1 Activity LED
Reset Button
2
HDD LED
FP PWRLED
Reset
PWR
3.3 V
ID_UID_SW/3.3V Stdby
Ground
Ground
19 20
NC
NIC2 Activity LED
Pull up to +3.3 Stby
X
X
NMI
Ground
Red+ (Blue LED Cathode)
Blue+ (OH/Fan Fail/UID LED)
3.3V
Pull up to +3.3 Stby
1. OH/Fan Fail
1
Overheat (OH)/Fan Fail
Connect an LED cable to pins 7 and 8 of the Front Control Panel to use the Overheat/Fan
Fail LED connections. The LED on pin 8 provides warnings of overheat or fan failure. See
the tables below for pin denitions.
OH/Fan Fail Indicator
Status
State Denition
O Normal
On Overheat
Flashing Fan Fail
OH/Fan Fail LED
Pin Definitions (JF1)
Pin# Denition
7 Blue LED
8 OH/Fan Fail LED