Supermicro X11SCA - Page 78

X11SCA/-W/-F User Manual
78
DMI De-emphasis Control
This feature controls the DMI De-emphasis setting. The options are -6 dB or -3.5 dB.
PEG Port Conguration
CPU SLOT6 PCI-E 3.0 X16
This displays information if a PCI-E device is installed.
SLOT6 Max Link Speed
Select Auto, Gen1, Gen2, or Gen3 to set the PEG Max Link Speed.
SLOT6 Power Limit Value
Enter a value for the upper limit on power (in watts) supplied by the slot. The range is
0-255. The default is 75.
SLOT6 Power Limit Scale
This feature controls the slot power limit scale. The options are 1.0x, 0.1x, 0.01x, and
0.001x.
CPU SLOT4 PCI-E 3.0 X8 (IN X16)
This displays information if a PCI-E device is installed.
SLOT4 Max Link Speed
Select Auto, Gen1, Gen2, or Gen3 to set the PEG Max Link Speed.
SLOT4 Power Limit Value
Enter a value for the upper limit on power (in watts) supplied by the slot. The range is
0-255. The default is 75.
SLOT4 Power Limit Scale
This feature controls the slot power limit scale. The options are 1.0x, 0.1x, 0.01x, and
0.001x.
Program PCIe ASPM after OpROM
This feature enables PCIe ASPM programming after OpROM. If set to Disabled, program-
ming occurs before OpROM. The options are Disabled or Enabled.
GT - Power Management Control
RC6(Render Standby)
Use this feature to enable Render Standby support. The options are Disabled or Enabled.