Supermicro X11SCA - Page 99

Chapter 4: BIOS
99
VLAN
This feature enables the IPMI VLAN function. The options are Disabled or Enabled.
*If the feature above is set to Enable, the following feature will become available for
conguration:
VLAN ID
Use this feature to enter the VLAN ID. The default setting is 0.
IPV6 Support
This feature enables LAN1 IPV6 Support. The options are Disabled or Enabled.
Conguration Address source
This feature congures the LAN channel parameters, either statically or dynamically. The
options are Static or DHCP.