Chapter 1: Configuring VROC RAID Settings
To Select Disks for the RAID Volumes
From the Create RAID Volume submenu, use the arrow keys to highlight Select Disk: and
press <Enter>. The following screen will display.
The options are (not selected) and X (selected). To select X as your desired RAID disk for
your RAID volume configuration, highlight X, press the down arrow key and then press
<Enter>*. (*See the note below.) Repeat the same step to select all your desired disks for your
desired RAID volumes.
Note: A faster way to select a disk is to press the <Space Bar> instead of pressing
<Enter>.
To Next Page
Loading...
