Chapter 1: Configuring VROC RAID Settings
1.3 Use of Journaling Drive
The following section describes the use of a journaling drive for the RAID5 volume, which is
a parity-based RAID. A journaling drive, used as an error event log, records an event when
an error occurs to a RAID5 volume. To create RAID5 drives, follow the instructions below.
Step 1. Refer to the instructions stated in Section 1.1 to access All Intel VMD Controllers
submenu and press <Enter>. When the following screen appears, select Create RAID Volume
and press <Enter>. The following screen will display:
When the screen above appears, use the down arrow key to select RAID Level and press
<Enter>. The following screen will display:
To Next Page
Loading...
