Supermicro X12 Series - To Mark a Non-RAID Drive as a Journaling Drive

Chapter 1: Configuring VROC RAID Settings
29
To Mark a Non-RAID Drive as a Journaling Drive
Refer to the instructions stated in Section 1.1 to access the All Intel VMD Controllers menu.
When the following screen appears, select a desired NVMe device from the list of Non-RAID
Physical Disks to be used as a journaling drive. A journaling drive is used as an error event
log to record an event when an error occurs to a RAID5 volume.
After selecting a NVMe device, press <Enter> and the following screen will appear. Select
Mark as Journaling Drive and press <Enter>.