Supermicro X12DPi-N6 - Page 162

Super X12DPi-N6/X12DPi-NT6 User's Manual
162
• HDD Password Conguration:
• Security Supported:
• Security Enabled:
• Security Locked:
• Security Frozen:
• HDD User Pwd Status:
• HDD Master Pwd Status:
Set User Password (Available when Security Frozen is Disabled)
Use this feature to set User's password.

Secure Boot
Note: For detailed instructions on how to congure Secure Boot settings, please refer
to the Secure Boot Conguration User's Guide posted on the web page under the link:
http://www.supermicro.com/support/manuals/.
When you select this submenu and press <Enter>, the following items will display:
Secure Boot
Select Enabled to use Secure Boot settings. The options are Enabled and Disabled.
Secure Boot Mode
Use this feature to select the desired secure boot mode for the system. The options are
Standard and Custom.
CMS Support
If this feature is set to Enabled, legacy devices will be supported by the system. The options
are Enabled and Disabled.
Key Management
Provision Factory Defaults
Select Enabled to install provision factory default values after a platform reset while the
system is in the Setup mode. The options are Disabled and Enabled.