Supermicro X12DPi-N6 - Page 87

Chapter 4: UEFI BIOS
87
TXT Support
Select Enable to enable Intel Trusted Execution Technology (TXT) support to enhance system
security and data integrity. The options are Disable and Enable.
Intel Virtualization Technology (Available when two processors are installed on the
motherboard and the TXT Support item above is set to Disable)
Select Enable to use Intel Virtualization Technology which will allow multiple workloads to share
the same set of common resources. On the shared virtualized platform, various workloads (or
tasks) can co-exist, sharing the same resources, while functioning in full independence from
each other with data migrating freely across multi-level infrastructures and scale as needed.
The settings are Enable and Disable.
Intel Virtualization Technology
Select Enable to enable the Intel Virtualization Technology for Virtualization platform support,
which will allow multiple operating systems to run simultaneously on the same computer to
maximize system resources for performance enhancement. The options are Disable and
Enable.
Enable SMX (Not Available when "Enable Intel® TXT" is set to Enable)
Select Enable to support Safer Mode Extensions (SMX) which provides a programming
interface for system software to establish a controlled environment to support the trusted
platform congured by the end user and to verify a virtual machine monitor before it is allowed
to operate. The options are Disable and Enable.
PPIN Control
Select Unlock/Enable to use the Protected-Processor Inventory Number (PPIN) in the system.
The options are Unlock/Enable and Lock/Disable.
AES-NI
Select Enable to use the Intel Advanced Encryption Standard (AES) New Instructions (NI) to
ensure data security. The options are Enable and Disable.
----------------------------------------------------------------
TME, TME-MT, TDX
----------------------------------------------------------------
Total Memory Encryption (TME)
Select Enabled to support total memory encryption to enhance memory data security. The
options are Disabled and Enabled.
*If this feature is set to Enabled, the followings item will display: