Supermicro X12SPZ-SPLN6F - Page 114

Super X12SPZ-SPLN6F/LN4F User's Manual
114
iSCSI Second Target Parameters
Connect
Use this feature to enable or disable the target establishment. The options are Disabled
and Enabled.
IP Address
Use this feature to congure the target IP address.
TCP Port
Use this feature to congure the target TCP port number (1 - 65535). The default value
is 3260.
Boot LUN
Use this feature to congure the boot LUN number (0 - 255). The default value is 0.
iSCSI Name
Highlight the feature and press enter to create an iSCSI name.
Secondary Device
Secondary Device
Use this feature to congure the secondary device MAC address. Use XX:XX:XX:XX:XX:XX
format.
Use Independent Target Portal
Use the independent target portal when the multipath I/O is enabled. The options are
Disabled and Enabled.
Use Independent Target Name
Use the independent target name when the multipath I/O is enabled. The options are
Disabled and Enabled.
Blink LEDs
Use this feature to identify the physical network port by blinking the associated LED. Use the
keyboard to select a value.
Link Status
Use this feature shows the link status for the device in this port.