Chapter 4: BIOS
119
BMC Firmware Revision
This feature displays the IPMI rmware revision used in your system.
IPMI STATUS (Baseboard Management Controller)
This feature displays the status of the IPMI rmware installed in your system.
System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled for all system event logging at boot up. The options are Disabled and Enabled.
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot. Select
Yes, On every reset to erase all system event logs upon each system reboot. Select No to
keep all system event logs after each system reboot. The options are No, Yes, On next reset,
and Yes, On every reset.
4.5 IPMI
Use this menu to congure Intelligent Platform Management Interface (IPMI) settings.