20
Super X12SPZ-SPLN6F/LN4F User's Manual
1.6 Power Supply
As with all computer products, a stable power source is necessary for proper and reliable
operation. It is even more important for processors that have high CPU clock rates where
noisy power transmission is present.
The X12SPZ-SPLN6F/LN4F motherboard accommodates a 24-pin ATX power supply.
Although most power supplies generally meet the specications required by the CPU, some
are inadequate. In addition, one 12V 8-pin power connection is also required to ensure
adequate power supply to the system.
Warning: To avoid damaging the power supply or the motherboard, be sure to use a
power supply that contains a 24-pin and an 8-pin power connector. Be sure to con-
nect the power supplies to the 24-pin power connector (JPW1), and the 8-pin power
connector (JPV1) on the motherboard. Failure in doing so may void the manufacturer
warranty on your power supply and motherboard.
It is strongly recommended that you use a high quality power supply that meets ATX power
supply Specication 2.02 or above. It must also be SSI compliant. (For more information,
please refer to the website at http://www.ssiforum.org/).
1.7 Serial Port
The X12SPZ-SPLN6F motherboard supports one serial communication connection. COM1
can be used for input/output. The UART provides legacy speeds with a baud rate of up to
115.2 Kbps as well as an advanced speed with baud rates of 250 K, 500 K, or 1 Mb/s, which
support high-speed serial communication devices.
To Next Page
Loading...
