Supermicro X12SPZ-SPLN6F - DIMM Installation; DIMM Removal

34
Super X12SPZ-SPLN6F/LN4F User's Manual
X12SPZ-LN4F
REV: 2.00
DESIGNED IN USA
LEDBMC
LEDPWR
JTPM1
JWD1
JD1
COM1
M.2-H
JPG1
JL1
JPME1
JPME2
JBM1
UID UIDLED
USB0/1 USB2/3
USB6/7
JNS1
JRK1
PCIe 4.0 x8
P1_NVME0
DIMMF1 DIMME1 DIMMH1 DIMMG1 DIMMC1 DIMMD1 DIMMA1 DIMMB1
JPDB1
BAR CODE
VGA
LAN6 LAN5
LAN3/4 LAN1/2
IPMI LAN
USB4/5 (3.0)
JBM2
CPU
JPFR2
JPFR3
JPFR1
JCPLD1
J19
JIPMB1
JNVI2CI
SRW3
JMD1
JADV1
S-SGPIO1
MH9
S-SATA0
S-SATA1
FANB FANA
J18
JF1
MH2
FAN4 FAN3
JVR1
FAN2 FAN1
MH5
JPV1
MH7
JPH1
JPW1
JPI2C1
JPL2
JLANLED1_1
JLANLED1
MAC CODE
JGP1
CPU1 SLOT6 PCI-E 4.0 x16
SRW4
BT1
SFP2 SFP1
CPU1 SLOT4 PCI-E 4.0 x16
JBT1
JSTBY1
Intel PCH
621A
MH3
MH4
MH6
JSLIM1
MH8
JTS1
JPL1
JPT1
JSLIM2
PCIe 4.0 x4
DIMM Installation
1. Insert DIMM modules in the following
order: DIMMC1, DIMMD1, DIMMA1,
DIMMB1, DIMMG1, DIMMH1, DIMME1,
DIMMF1, and insert the desired number of
DIMMs into the memory slots based on the
Recommended Memory Population Guide
table on page 32.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Push both ends of the module straight
down into the slot until the module snaps
into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.
DIMM Removal
Press both release tabs on the ends of the DIMM
module to unlock it. Once the DIMM module is
loosened, remove it from the memory slot.
Release Tabs
Notches
Push both ends
straight down into
the memory slot.