Supermicro X12SPZ-SPLN6F - Page 129

Chapter 4: BIOS
129
Default Options
Load Optimized Defaults
To set this feature, select Restore Defaults from the Save & Exit menu and press <Enter>.
These are factory settings designed for maximum system stability, but not for maximum
performance.
Save As User Defaults
To set this feature, select Save as User Defaults from the Save & Exit menu and press
<Enter>. This enables you to save any changes to the BIOS setup for future use.
Restore User Defaults
To set this feature, select Restore User Defaults from the Save & Exit menu and press <Enter>.
Use this feature to retrieve user-dened settings that were saved previously.
Boot Override
This feature allows you to override the Boot priorities sequence in the Boot menu, and
immediately boot the system with a device specied instead of the one specied in the boot
list. This is an one-time override.
(B24/D0/F0) UEFI PXE IPv4: Intel(R) I350 Gigabit Network Connection
(MAC:3CECEF2C7E14)
(B24/D0/F1) UEFI PXE IPv4: Intel(R) I350 Gigabit Network Connection
(MAC:3CECEF2C7E15)
(B24/D0/F2) UEFI PXE IPv4: Intel(R) I350 Gigabit Network Connection
(MAC:3CECEF2C7E16)
(B24/D0/F3) UEFI PXE IPv4: Intel(R) I350 Gigabit Network Connection
(MAC:3CECEF2C7E17)
(B25/D0/F0) UEFI PXE IPv4: Broadcom BCM57414 NetXtreme-F 10Gb/25Gb RDMA
Ethernet Connection (MAC:3CECEF302A34)
(B25/D0/F1) UEFI PXE IPv4: Broadcom BCM57414 NetXtreme-F 10Gb/25Gb RDMA
Ethernet Connection (MAC:3CECEF302A35)
(B24/D0/F0) UEFI PXE IPv6: Intel(R) I350 Gigabit Network Connection
(MAC:3CECEF2C7E14)
(B24/D0/F1) UEFI PXE IPv6: Intel(R) I350 Gigabit Network Connection
(MAC:3CECEF2C7E15)
(B24/D0/F2) UEFI PXE IPv6: Intel(R) I350 Gigabit Network Connection
(MAC:3CECEF2C7E16)