Super X12SPZ-SPLN6F/LN4F User's Manual
144
Note: Do not interrupt the BIOS ashing process until it has completed.
5. After the BIOS recovery process is completed, press any key to reboot the system.
6. Using a dierent system, extract the BIOS package into a USB ash drive.
7. Press <Del> during system boot to enter the BIOS Setup utility. From the top of the tool
bar, select Boot to enter the submenu. From the submenu list, select Boot Option #1
as shown below. Then, set Boot Option #1 to [UEFI AP:UEFI: Built-in EFI Shell]. Press
<F4> to save the settings and exit the BIOS Setup utility.
4. When the screen as shown above displays, use the arrow keys to select the item
"Proceed with ash update" and press the <Enter> key. You will see the BIOS recovery
progress as shown in the screen below:
To Next Page
Loading...
