Supermicro X12SPZ-SPLN6F - Page 3

3
Preface
Preface
About This Manual
This manual is written for system integrators, IT technicians and knowledgeable end users.
It provides information for the installation and use of the motherboard.
About This Motherboard
The SupermicroX12SPZ-SPLN6F/LN4F supports a 3rd Generation Intel® Xeon Scalable
Processor with up to 40 cores and a TDP of 270W. Built with the Intel 621A chipset, the
X12SPZ-SPLN6F/LN4Fsupports 2TB of ECC RDIMM and LRDIMM DDR4 with speeds of
up to 3200MHz, SATA 3.0 ports, M.2 M-Key, Oculink, SlimSAS, 25G/10G ber ports, and a
Trusted Platform Module (TPM) header. This motherboardis optimized for high-performance,
high-end computing platforms that address cloud, data center, and storage needs. Please
note that this motherboard is intended to be installed and serviced by professional technicians
only. For processor/memory updates, please refer to our website at http://www.supermicro.
com/products/.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
damage done to the components or injury to yourself:
Warning! Indicates high voltage may be encountered while performing a procedure.
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
Important: Important information given to ensure proper system installation or to
relay safety precautions.
Note: Additional Information given to di󰀨erentiate various models or to provide in-
formation for proper system setup.