Supermicro X12SPZ-SPLN6F - Page 58

58
Super X12SPZ-SPLN6F/LN4F User's Manual
ME Manufacturing Mode
Close pins 2-3 of jumper JPME2 to bypass SPI ash security and force the system to operate
in the manufacturing mode, which will allow the user to ash the system rmware from a host
server for system setting modications. Refer to the table below for jumper settings.
Manufacturing Mode
Jumper Settings
Jumper Setting Denition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacturing Mode
X12SPZ-LN4F
REV: 2.00
DESIGNED IN USA
LEDBMC
LEDPWR
JTPM1
JWD1
JD1
COM1
M.2-H
JPG1
JL1
JPME1
JPME2
JBM1
UID UIDLED
USB0/1 USB2/3
USB6/7
JNS1
JRK1
PCIe 4.0 x8
P1_NVME0
DIMMF1 DIMME1 DIMMH1 DIMMG1 DIMMC1 DIMMD1 DIMMA1 DIMMB1
JPDB1
BAR CODE
VGA
LAN6 LAN5
LAN3/4 LAN1/2
IPMI LAN
USB4/5 (3.0)
JBM2
CPU
JPFR2
JPFR3
JPFR1
JCPLD1
J19
JIPMB1
JNVI2CI
SRW3
JMD1
JADV1
S-SGPIO1
MH9
S-SATA0
S-SATA1
FANB FANA
J18
JF1
MH2
FAN4 FAN3
JVR1
FAN2 FAN1
MH5
JPV1
MH7
JPH1
JPW1
JPI2C1
JPL2
JLANLED1_1
JLANLED1
MAC CODE
JGP1
CPU1 SLOT6 PCI-E 4.0 x16
SRW4
BT1
SFP2 SFP1
CPU1 SLOT4 PCI-E 4.0 x16
JBT1
JSTBY1
Intel PCH
621A
MH3
MH4
MH6
JSLIM1
MH8
JTS1
JPL1
JPT1
JSLIM2
PCIe 4.0 x4
12
1. ME Recovery
2. Manufacturing Mode
Management Engine (ME) Recovery
Use jumper JPME1 to select ME Firmware Recovery mode, which will limit resource allocation for
essential system operation only in order to maintain normal power operation and management.
In the single operation mode, online upgrade will be available via Recovery mode. Refer to the
table below for jumper settings.
ME Recovery Mode
Jumper Settings
Jumper Setting Denition
Pins 1-2 Normal (Default)
Pins 2-3 ME Recovery