Supermicro X12STL-F - Page 99

Chapter 4: BIOS
99
Set User Password
This option allows you to set up HDD User Password. It is advisable to Power Cycle System
after Setting Hard Disk Password.
Set Master Password
This option allows you to set up Master Password.

Secure Boot
• System Mode
• Secure Boot
Secure Boot
Select Enable for secure boot support to ensure system security at bootup. The options
are Disabled and Enabled.
Secure Boot Mode
Select the desired secure boot mode for the system. The options are Standard and Custom.
CSM Support
This feature is used to enable or disable CSM support. The options are Disabled and
Enabled.
*If Secure Boot Mode is set to Standard, Restore Factory Keys, Reset to Setup Mode,
Exit Deployed Mode, and Key Management will be grayed out.

Restore Factory Keys
Select Yes to restore all factory keys to the default settings. The options are Yes and No.

Reset to Setup Mode
This feature deletes all Secure Boot key databases from NVRAM.

Enter Audit Mode
This feature allows you to enter the Audit Mode workow. Please note that changing from
User Mode to Audit Mode will erase Platform Key (PK) variables.

Exit Deployed Mode
This feature allows you to transition between Deployment and User Modes.