Supermicro X13DAI-T - Page 137

Chapter 4: UEFI BIOS
137
Supermicro KMS Server Conguration
Note: Be sure to congure all the features in the section of Supermicro KMS Server
Conguration and the feature of "KMS Security Policy" (page 141) so that your system
can communicate with the KMS server.
Supermicro KMS Server IP address
Use this feature to set the Supermicro Key Management Service (KMS) server IPv4 address
in dotted-decimal notation.
Second Supermicro KMS Server IP address
Use this feature to set the second Supermicro KMS server IPv4 address in dotted-decimal
notation.
Supermicro KMS TCP Port number
Use this feature to set the TCP port number used in Supermicro KMS Server. The valid range
is 100–9999. The default setting is 5696. Do not change the default setting unless a di󰀨erent
TCP port number has been specied and used in the Supermicro KMS Server.
KMS Time Out
Use this feature to set the KMS server connecting timeout (in seconds). The default setting
is 5 (seconds).
TimeZone
Use this feature to set the correct time zone. The default setting is 0 (not specied).
Client UserName
Press <Enter> to set the client identity (UserName). The maximum length is 63 characters.
Client Password
Press <Enter> to set the client identity (Password). The maximum length is 31 characters.