57
Chapter 2: Installation
DIMM Removal
Press both release tabs on the ends of the memory module to unlock it. Once the memory
module has been loosened, remove it from the memory slot.
Warning! Please do not use excessive force when pressing the release tabs on the ends of the
DIMM socket to avoid causing any damage to the memory module or the DIMM socket. Please
handle memory modules with care. Carefully follow all the instructions given on the rst page
of this chapter to avoid ESD-related damages done to your memory modules or components.
Note: Removing a DDR5 DIMM module at a slant angle will cause module damages.
It is strongly recommended that you lift the module straight up out of the slot.
To Next Page
Loading...
Need help?
General
