Supermicro X13SAE - Page 108

Super X13SAE/X13SAE-F User's Manual
108
*If the feature above is set to Enabled, the following feature will become available for
conguration:
Conguration Address Source
This feature allows you to select the source of the IP address for this computer. If Static
is selected, you will need to know the IP address of this computer and enter it to the
system manually in the eld. If DHCP is selected, the BIOS will search for a Dynamic Host
Conguration Protocol (DHCP) server in the network that is attached to and request the
next available IP address for this computer. The options are Static and DHCP.
*If the Conguration Address Source is set to DHCP, the following features will be
displayed:
• Station IPv6 Address
• Prex Length
• IPv6 Router1 IP Address
*If the Conguration Address Source is set to Static, the following features will
become available for conguration:
• Station IPv6 Address
• Prex Length
• IPv6 Router1 IP Address